Uses dimple technology for precise burst pressure control. Thicker and stronger than traditional
Certifications
BasCo provides a full range of rupture disk products and has obtained qualification certificates including TS, EAC, NB, ASME, PED, and Special Equipment Inspection Institute certifications. The products comply with domestic and international standards such as GB/T 567, ASME BPVC Section VIII, API 520, and ISO 4126. We can provide safe, reliable and customized solutions and products according to users’ actual working conditions.
Options
Fluoropolymer liners or coatings
Burst Indicator*Note: The maximum temperature rating of rupture disks supplied with liners and BI is lower than the base disk material
Suitable for safety valve isolation
When a disk is mounted under a Safety Relief Valve, the working components of the valve are isolated from hostile environments.
Tell-Tale Assembly：Pressure Gauge,Tee,Excess Flow Valve,Tube
Tolerance / (GB567-2012)
| Bursting pressure bar |
≥0.01~<0.1 | ≥0.1~＜1 | ≥1~＜3 | ≥3~＜1000 | ≥1000~＜5000 |
| Tolerance | ±50% | ±25% | ±0.015MPa | ±5% | ±4% |
