Reverse arch rupture disks with the convex side on the high side of the pressure system. Reverse arch with slot rupture disks, which are opened by the destabilizing flip of the rupture disk, following a preformed, engraved slot to relieve pressure.
Options
Fluoroplastic lined or coated
BI Burst Sensor
Note: Lining and BI have a lower temperature resistance than the Strength Membrane.
Safety Valve Protection
When rupture disks are installed under the safety valve, they isolate the valve's working parts from corrosive media.
Relief components: gauges, tees, relief valves, tubing
Burst tolerance / (GB567-2012)
| Calibrated burst pressure bar |
≥0.01~<0.1 | ≥0.1~＜1 | ≥1~＜3 | ≥3~＜1000 | ≥1000~＜5000 |
| Bursting Tolerance | ±50% | ±25% | ±0.015MPa | ±5% | ±4% |
